Charging manual

Charge CP 500A

The Charge CP500A fast charging station from Siemens allows you to charge two vehicles simultaneously and has a charging power of up to 22 kW. 

Charging via customer card

1. START THE CHARGING PROCESS

  • First connect the charging cable to the vehicle only.
  • Hold your OMV E-Mobility Card for identification until the charging station reports that the vehicle can be connected.
  • Press the plug firmly against the lock the left or right socket of the charging station to open it (model with spring cover: open the cover and plug the cable firmly into the socket).
  • After successful authorization, the charging process starts automatically.

2. END THE CHARGING PROCESS

  • Hold your OMV E-Mobility Card once at the display, "vehicle charging" appears. Hold the OMV E-Mobility to the display a second time to finish the loading process.
  • After successful logoff, the sockets are unlocked and you can disconnect the charging cable from the vehicle. Release the parking space for others after charging. 

Note: Unlocking the vehicle can stop the charging process.

Important note

  • The security check between the vehicle and wallbox can take up to 30 seconds.
  • If the charging process is started via your mobile phone, it must also be terminated via your mobile phone. A combination of different activation methods (customer card, mobile phone) is not possible.
  • INCIDENTS: In case of incidents please contact the service hotline +43 5 0313 51855.